1. Product Name:Brake Pads With Brake-In Coating
2. Product Description:Brake Pads'Specification：



Model No:D905

Width : 108.5mm

Height : 48mm
Thickness : 16.5mm
Material:Ceramic


Vehicle:
Nissin



Features&Benefit:

1.The brake pads have a special brake in coating applied to the pad surface to help with the bedding in process,it can take up less miles before the pads are at their best. The coating are imported,and it is the best coating in the industry so far.

2.Custom-fit to directly replace your factory pads.

3.Center-line slot, chamfered edges and factory-fitted shims ensure silent stops.

4.heat treatment reducing the heat fade.

5.Black powder-coating safeguards against rust.





Why need to brake in brake pad?

After replacing the brake pads, if you feel that the brakes are soft, you must step on the brakes to eliminate the gap between the brake pads and the brake disc. It takes 200 kilometers to achieve the best braking effect. Try to drive to a place with good road conditions and few cars. The running-in method of the new brake pads is to use fractional point brakes to brake as much as possible, and do not use sudden brakes before running-in well.



How do the new brake pads break in?

1. Lightly step on the brakes and brake with moderate force to reduce the vehicle speed to about 10-20 km/h. There is no need to keep an eye on the speedmeter, just keep your eyes on the road and make sure you notice the road.

2. Loosen the brake and drive for a few kilometers to cool the brake pad temperature slightly. However, do not brake until the vehicle stops, otherwise the brake pad material is integrated into the brake disc, which will cause brake vibration.

3. Repeat at least 10 braking cycles



Brake pads must choose the products of regular manufacturers. Inferior brake pads will not only affect the braking effect, but also cause damage to the brake disc.



FAQ:

1.What certifications do you have?

Our factury has passed ISO/TS16949 issued by TUV Rheinland in 2002, we are the first factury with such certification then. We also have more than 300kinds of products with Emark certification.



2. Can you develop brake pads according to clients' sample?

Yes, we can. If your order quantity can reach 1000sets/model, then we can open mould for u for free.

If you have many items,then we can make for you with min500sets/model.



3. How many brake pads can be packed in a 20'GP?

It's about 15000sets for a 20'GP.
3. Price:1.00
4. Product Website: http://www.shikingbrakes.com
5. Company Description: Shijiazhuang Shiking Trading CO.,LTD
6. Address: ChinaChinaShijiazhuangYuhuaLangqiaosiji, Intersection of Street Zhaiying and Road Fangxing, Yuhua District, Shijiazhuang City, Hebei Province
7. Descption: Shijiazhuang Shiking Trading CO., LTD is professional in tricycle;electric car; light truck's brake shoes, drum brakes; motorcycle brake shoe,brake pad;automobile drum brake shoes, disc brake pads, brake rotors, brake drum etc, the quality of our products has been proved by overseas clients from Europe, America, the Middle East, Africa etc. With about 30 years' experience in this field, our clients feel satisfied with our quality and service, and enjoy long good cooperation relationship with us.
8. Registered Capital: 100
9. EmployeeNum: 100
Shijiazhuang Shiking Trading CO.,LTD
10. Contact: Sunny Sun
11. Telphone: 86-311-88663762
12. Fax: 86-311-88663762
13. Email: shikingbrakesun@aliyun.com
14. Company Website: https://www.shikingbrakes.com